EN
Türkçe English Français
Home

Arma Resin
“The better way of Dental 3D Printing”

All Resins Dimensionally Tested By Cube Printings from Corner to Center Of Printing Area

First test is dimensional stability test. We put 9 cubes as shown at the left picture to the printing table. Most of the printers has a light intensity difference from center to corner by %9-%30. We measure all the printed results before & after post cure and see the standart deviation. Thanks to our technology we get 9-16 micron standart deviation from the printed results. One of the most famous resin’s standart deviation is more than 26 micron.

All resins needs to work as fast as possible

We control our resins formulations’ reaction speed when the resin exposure by UV light. We achieve this not adding more photo initiators to the resin. By the way there is no color change after days and weeks. For example; with a light intensity 7 mW/cm^2; we are able work with 0,8-1,1 sec exposure times. A model which has around 300 layers (50 micron) can be printed in 19 minutes.

All resins needs to work by short separation distances not to loose much time

We develop our resins to work fast with all types of printers. To achieve that, we decrease the separation force of our resin from printing film. For example, one of the most famous printer brand works with its own resin by a 10 mm separation distance. We are able to work with 3.7 mm. It means %40-%50 less printing times.

All Resins Geometrically Tested By 3d Deformatıon Analysis

As a last testing; we make 3D deformation analysis with the original datas. Our model resins has below than 100 micron deformation for a full arch. This is a high level precision for the 3D printing market.

We Create our own formulations as to the process need

First we analyze the process and then start to develop formulations. We make our own synthesis for some of the indicators in our synthesis laboratory. Surface modifications are the key point to control the chemical bonds. We are professional regarding these critical points.

We make our in-house analysis and test as to the ISO standards

We measure all of our resins regarding the Elasticity modulus, flexural strength, tensile strength, hardness and elongation. Also water absorption tests, colour stability tests, phase separation tests are made in house from our analysis laboratory.

DENTAL
MODEL HP

Biocompatible resin for dental models.
Highly accurate and durable.

Optimised polymerisation during UV penetration / Controlled Reaction Speed

SPECIALITIES
  • Fast printing
  • Perfect topographies
  • Scratch Resistance
  • Color Stability
  • Excellent Endurance for Autoclave
  • High Surface Hardness
  • Carvable like gypsum
  • High flexural strength
  • Excellent Dimensional Stability
  • Works with 385 / 405 nm
  • Compatible with DLP / LCD
  • Shape Stability After Curing
  • Eliminated Phase Separation During Storage / Long Shelf Life
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 118,88
Elasticity Modulus ISO 4049 2047,05
Viscosity (m.Pa.s 23 0C) 470
Elongation at Break (mm) ISO 4049 3,12
Colour Alternatives
  • Standart Colour: Peach
  • Alternative Colour: Beige
Certification
  • CE Class I
Packaging Alternatives
SPECIALITIES
  • Fast printing
  • Perfect topographies
  • Color Stability
  • Excellent Endurance for Autoclave
  • High Surface Hardness
  • Excellent Dimensional Stability
  • High flexural strength
  • Works with 385 / 405 nm
  • Compatible with DLP / LCD
  • Shape Stability After Curing
  • Eliminated Phase Separation During Storage / Long Shelf Life
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 100,31
Elasticity Modulus ISO 4049 2081,3
Viscosity (m.Pa.s 23 0C) 110
Elongation at Break (mm) ISO 4049 1,95
Colour Alternatives
  • Standart Colour: Beige
  • Alternative Colour: Gray
Certification
  • CE Class I
Packaging Alternatives

DENTAL
MODEL ST

Biocompatible resin for dental models.
Highly accurate and cost effective.

Optimised polymerisation during UV penetration / Controlled Reaction Speed

TEMP
TEETH

Biocompatible resin for temporaries.
Ultra high flexural strength.
Low water absorption and stable colors.

Optimised polymerisation during UV penetration / Controlled Reaction Speed

SPECIALITIES
  • Fast printing
  • Perfect topographies
  • Color Stability
  • Bio-compatible
  • Easy Stain & Glaze
  • Excellent Dimensional Stability
  • Ultra high flexural strength
  • Compatible with DLP / LCD
  • Nearly no water absorption
  • Works with 385 / 405 nm
  • MMA free formula
  • Easy to polish
  • Eliminated Phase Separation During Storage / Long Shelf Life
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 10477 125,46
Elasticity Modulus ISO 10477 2329,48
Viscosity (m.Pa.s 23 0C) 400
Elongation at Break (mm) ISO 10477 3,7
Water Absorption (mg/mm3) ISO 4049 0,078
Colour Alternatives
  • A1-A2-A3-Bleach
  • Other colors are on demand
Certification
  • CE Class I (30 days usage in mouth)
Packaging Alternatives
SPECIALITIES
  • Ultra fast printing
  • Perfect Details
  • Fast Burning
  • Low Shrinkage
  • Ensure Clasp Flex Without Breaking
  • Excellent Dimensional Stability
  • Low Thermal Expansion
  • Optimized Depth of Cure
  • Works with 385 / 405 nm
  • Residue Free
  • No need for post curing
  • Easy to work with investments
  • Compatible with DLP / LCD
  • Eliminated Phase Separation During Storage / Long Shelf Life
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 33,89
Elasticity Modulus ISO 4049 640,31
Viscosity (m.Pa.s 23 0C) 300
Elongation at Break (mm) ISO 4049 7,11
Burnout < % 0,05
Colour Alternatives
  • Standart Colour: Transperent Yellowish
Packaging Alternatives

DENTAL
CAST V 1.0

Biocompatible resin for dental casting.
Cost effective and fast working.

Optimised polymerisation during UV penetration / Controlled Reaction Speed

SURGICAL
GUIDE

Biocompatible resin for surgical guides.
Cost effective and highly precise

Optimised polymerisation during UV penetration / Controlled Reaction Speed

SPECIALITIES
  • Ultra fast printing
  • Easy to Polish
  • High precision
  • Transparent to see drill position.
  • Excellent Dimensional Stability
  • Optimized Depth of Cure
  • Works with 385 / 405 nm
  • High Flexural Strength
  • Compatible with DLP / LCD
  • Eliminated Phase Separation During Storage / Long Shelf Life
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 88,17
Elasticity Modulus ISO 4049 1937,54
Viscosity (m.Pa.s 23 0C) 300
Elongation at Break (mm) ISO 4049 1,71
Colour Alternatives
  • Standart Colour: Transperent
Packaging Alternatives
SPECIALITIES
  • Ultra fast printing
  • Eliminating stone models
  • High Flexural Strength
  • Improves impression accuracy
  • Excellent Dimensional Stability
  • Compatible with DLP / LCD
  • Works with 385 / 405 nm
  • Eliminated Phase Separation During Storage / Long Shelf Life
Mechanical Properties
Property Procedure Result
Flexural Strength ISO 4049 143,03
Elasticity Modulus ISO 4049 2640,76
Viscosity (m.Pa.s 23 0C) 470
Elongation at Break (mm) ISO 4049 3,41
Colour Alternatives
  • Standart Colour: Blue
Packaging Alternatives

IMPRESSION
TRAY

Biocompatible resin for customized trays.
Strong and durable to withstand the forces of
taking the patient impression.

Optimised polymerisation during UV penetration / Controlled Reaction Speed